Fault Codes

[wader]

i have fitted a second hand abs pump today as my warning light was on, the abs warning light has come back on and the fault code is 01276 abs hydroulic pump v64 signal outside tolerances intermitent, what does this mean,is the second hand pump i fitted today no good, can anyone help me solve this problem

[TeamGreen]

Had this on mine and I replaced the ABS fuses even though they looked fine and it cleared it. Worth a try before you strip it all down again.

[big_kev]

Did you drive it to see if the ABS light cleared when you got above approx 20mph.

 

The code may just be a historical one.....and as such can be cleared.

[wader]

Did you drive it to see if the ABS light cleared when you got above approx 20mph.

 

The code may just be a historical one.....and as such can be cleared.

yes i drove home,then took it to garage and tried to clear it,then drove again,and it came back on

[wader]

Had this on mine and I replaced the ABS fuses even though they looked fine and it cleared it. Worth a try before you strip it all down again.

how many fuses r there,i can only see one under the dash any suggestions are very welcome

[Mirez]

Had this on mine and I replaced the ABS fuses even though they looked fine and it cleared it. Worth a try before you strip it all down again.

how many fuses r there,i can only see one under the dash any suggestions are very welcome

 

FOUR! two in the engine bay, two in the cabin and the pump is one of the engine bay fuses.

 

F101 and F102 in the engine bay - second and third in, both 30Amp

F13 and F15 in the cabin - 5Amp and 10Amp